[amsat-bb] WiSP WIN10 issues

[kb2mjeff at att.net]

Well make my day 😊  Program installed and talking to my  9100 , ready for  FS-3 passes in the morning. I will report my results here. Thanks guys…

 

73 Jeff kb2m

 

From: Mark L. Hammond <marklhammond at gmail.com> 
Sent: Monday, February 11, 2019 4:40 PM
To: kb2mjeff at att.net
Cc: AMSAT -BB <amsat-bb at amsat.org>
Subject: Re: [amsat-bb] WiSP WIN10 issues

 

Jeff, yes, Chris just announced this--now ver 0.17.  Try it!

 

http://www.g0kla.com/pacsat/index.php

 

Mark N8MH 

 

On Mon, Feb 11, 2019 at 4:38 PM <kb2mjeff at att.net <mailto:kb2mjeff at att.net> > wrote:

Hi Dave. There is an issue with the old program WiSP  running under WIN10. I
had no issues until I switched the sat computer here over from WIN7. For
various unknown reasons, Windows updates, shutting computer down without
closing WiSP first causes some kind of registry corruption. Only way I found
so far how to get it running again is to do a regedit, clearing out all WiSP
Falconsat-3 registry entries, and then re install the sats into WiSP. Just a
bit tedious. There has to be an easier way. Someone volunteered to
rewrite/recompile WiSP  under a newer version of Windows but I understand
that the  source code isn't available to do so. 

73 Jeff kb2m


-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces at amsat.org <mailto:amsat-bb-bounces at amsat.org> > On Behalf Of Dave Webb KB1PVH
Sent: Monday, February 11, 2019 3:08 PM
To: kb2mjeff at att.net <mailto:kb2mjeff at att.net> 
Cc: AMSAT -BB <amsat-bb at amsat.org <mailto:amsat-bb at amsat.org> >
Subject: Re: [amsat-bb] WiSP WIN10 issues

Jeff,

 Try right clicking and select Run as Administrator to see if that changes
it.

Dave-KB1PVH


Sent from my Galaxy S9

On Mon, Feb 11, 2019, 11:53 AM <kb2mjeff at att.net <mailto:kb2mjeff at att.net>  wrote:

> I rebooted my WIN10 computer after a good Falconsat3 pass this morning.
> When
> I brought WiSP back up I'm again having the disappearing sat config 
> information issue. Of course I blew the pass as I don't have enough 
> time to enter the data before the end of the pass. Does anyone have 
> any kind of fix for this behavior?
>
> 73 Jeff kb2m
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org> . AMSAT-NA makes this open forum available 
> to all interested persons worldwide without requiring membership. 
> Opinions expressed are solely those of the author, and do not reflect 
> the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org> . AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org> . AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb



-- 

Mark L. Hammond [N8MH]