[amsat-bb] A new 400bps telemetry beacon now on!

[Julien NICOLAS]

If you are using wine, there is a display bug, so you cannot see what 
you are decoding.
A workarround : in "Output setting" check log to file, and the open this 
files in .wine/drive_c/ with tail -f for example.

Also, I noticed that the timestamp inside decoded data wasn't correct. 
It seems to think that we are the 2000-07-30.

Thank to all :)
F4HVX

Le 13/02/2019 23:12, Graham Shirville a écrit :
> Those of a certain vintage will remember listening to the distinctive
> 400 bps beacons from AO10, 13 and finally AO40.
> 
> You can now hear the sound again, live. If you are in range of
> Oscar-100 then tune to 10489.800 MHz or, if not, then logon to the
> BATC/AMSAT-UK  websdr here https://eshail.batc.org.uk/nb/and tune to
> the same frequency!
> 
> Wonderful...thank you QARS and AMSAT-DL
> 
> 73
> Graham
> G3VZV
> 
> 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite 
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb