[amsat-bb] HRD rotor settings

[Michael Carper, Ph.D.]

Guys... with a G-5500... you'll have a GS-232A/B controller.  When you
connect in the Rotator app... you select the correct Yaesu controller...
the default baud rate is 4800 (which is fine).

Make sure you can control the AZ of that rotor from within the Rotator app
(which will verify that it's all connected properly).

Then start up the DDE functionality in Rotator... then you can enable the
rotor from within the Satellite Tracking app.

Mike, WA9PIE
(HRD Software)

On Mon, Feb 25, 2019 at 4:03 PM Mike Lucas <documike at comcast.net> wrote:

> There's a release notes document link on HRD site that has anything related
> to the Satellite program documented.  There were quite a few changes from
> what I read.
>
> -----Original Message-----
> From: AMSAT-BB <amsat-bb-bounces at amsat.org> On Behalf Of James Brown
> Sent: Monday, February 25, 2019 1:37 PM
> To: amsat-bb at amsat.org
> Subject: [amsat-bb] HRD rotor settings
>
> Just downloaded the HRD 6.5-0-196 revision to satellite tracker.Dont see
> any
> visable changes to the program yet!
>
> I am using a REC-m/G5500 rotator. What settings needed to make HRD rotator
> software work?
>
>
> Jim KI6WJ
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to
> all
> interested persons worldwide without requiring membership. Opinions
> expressed are solely those of the author, and do not reflect the official
> views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>