[amsat-bb] SatPC32 and Ham Radio Deluxe

[Bob Keating]

Hi  George,

I have found that as I have added additional software programs to work 
with HRD, such as N1MM Logger and HDSDRplay, I have had to install 
Virtual Serial Ports Emulator and run the Splitter function. It creates 
a number of virtual serial ports that I can connect HRD, N1MM and HDSDR 
without any conflict. On my system I point VSPE to COM 4 and then have 
created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then 
connected to COM 20 and they all work fine. Give that a try and see if 
it helps. Good luck!

73,

Bob N6REK

On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:
> Hi All,
> I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32.  My radio is IC-9100.   The computer has two COM ports.  One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe.  But, the Ham Radio Deluxe does not connect to IC-9100.  What am I doing wrong?  Appreciate any help.
> 73, George N3GS, EM28 in Kansas
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb