[amsat-bb] SatPC32 and Ham Radio Deluxe

[Eli Caul]

I've been struggling with a 9100 and HRD, and finally got it working reliably with a CT-17 USB->CI-V adapter at 19,200. 

My only trouble now is something that a lot of people discuss - I can only get it to adjust one VFO at a time, despite the setting in 'Radio Options' that is designed for the 9100.  

Has anyone successfully gotten HRD to manipulate both VFO?   I do not want to use two radios or two different software programs if I can help it.

Thank you,

KK6ZHZ

- Eli Caul

Director of Customer Care
Sonic
707-237-6201 Direct
707-521-0131 Faxline

-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces at amsat.org> On Behalf Of David W0DHB
Sent: Tuesday, January 29, 2019 16:23
To: 'Bob Keating' <bkeating1954 at gmail.com>; amsat-bb at amsat.org
Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe

One of the 9100 serial ports is for CI-V and the other is for Radio Cloning, etc

Bob's suggestion is spot on.
You can find VSPE at http://www.eterlogic.com/Products.VSPE.html 

-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces at amsat.org> On Behalf Of Bob Keating
Sent: Saturday, January 26, 2019 13:29
To: amsat-bb at amsat.org
Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe

Hi  George,

I have found that as I have added additional software programs to work with HRD, such as N1MM Logger and HDSDRplay, I have had to install Virtual Serial Ports Emulator and run the Splitter function. It creates a number of virtual serial ports that I can connect HRD, N1MM and HDSDR without any conflict. On my system I point VSPE to COM 4 and then have created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then connected to COM 20 and they all work fine. Give that a try and see if it helps. Good luck!

73,

Bob N6REK

On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:
> Hi All,
> I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32.  My radio is IC-9100.   The computer has two COM ports.  One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe.  But, the Ham Radio Deluxe does not connect to IC-9100.  What am I doing wrong?  Appreciate any help.
> 73, George N3GS, EM28 in Kansas
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available 
> to all interested persons worldwide without requiring membership.
> Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb