[amsat-bb] IC-9700 mode setting problem

[Dave Webb KB1PVH]

Erich,

 I'm running firmware 1.11 and everything works as it should.

Dave-KB1PVH


Sent from my Galaxy S9

On Sun, Jul 7, 2019, 12:05 PM Erich Eichmann via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Hello,
> A German user of the IC-9700 (Firmware vers. 1.11) reports the following
> problem when controlling the radio by SatPC32: When he selects a
> satellite the frequencies are set correctly, but the downlink mode goes
> immediatly to DATA mode.  With FO-29, AO-07 the radio displays 'USB-D'
> as downlink mode, with SO-50 'FM-D', the same with all satellites.
> The mode settings in Doppler.SQF are correct (USB, FM etc.). The uplink
> mode is set correctly to LSB, FM etc. He can change to normal mode by
> pressing the field DATA in the mode screen, but when he selects another
> satellite the radio switchs  again to DATA mode.
>
> With my radio (Firmwarevers. 1.06) also  the donwlink mode is set
> correctly to USB , FM etc (without the  '-D'). I can manually switch to
> USB-D, FM-D etc.  by pressing the field 'DATA' in the mode screen. The
> '-D' then remains until I switch to another satellite, because the
> program sets the mode only once when the satellite is selected. When I
> switch to another satellite the radio goes to back to USB, FM etc.
>
> Has someone noticed such problem?
> Many thainks.
> 73s, Erich, DK1TB
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>