[amsat-bb] Falconsat-3 upload problem
Mark L. Hammond
marklhammond at gmail.com
Mon Jun 17 14:52:53 UTC 2019
Hello Hans, I have not been working FS-3 recently, since the IC-9700 will
not do 9600 packet [iCom, please fix!!] :( So I cannot comment on recent
uploads. However, to add to Bob's thoughts--are you running full duplex?
It's critical. Also, is your transmit signal desensitizing your receive
signal? That is important, too.
In the next week or so I will change radios at my station so I can again
use FS-3. I'll be better able to share current experiences with you.
73,
Mark N8MH
On Mon, Jun 17, 2019 at 9:19 AM Hans BX2ABT via AMSAT-BB <amsat-bb at amsat.org>
wrote:
> I'm not behind my shack computer right now, but I know that PSGS and
> Direwolf each have a TX delay. Are you referring to those maybe being
> too long? If so, then why are all other commands (DL and directory
> listings) giving me no problem?
>
> 73 de Hans
>
> BX2ABT
>
>
> On 06/17/2019 08:53 PM, Robert Bruninga wrote:
> > I am no expert. But remember that your RF and all processing has to
> > be full duplex. The turn arround for packets in the satellite is
> > instantaneous.
> > with no TXD delays. Bob
> >
> >
> > On Mon, Jun 17, 2019 at 2:24 AM Hans BX2ABT via AMSAT-BB
> > <amsat-bb at amsat.org <mailto:amsat-bb at amsat.org>> wrote:
> >
> > Up til now I have been successful in getting PacSatGroundStation
> > (PSGS)
> > to work on receive. You can go here if you want to see my setup:
> > http://bx2abt.com/main/Falconsat-3 . I can hit FalconSat-3 with a
> > directory request or file download request and get an immediate
> > response
> > and consequent downloads. Uploading is a different story, however. I
> > have been able to get some messages uploaded, but it was more by
> > chance.
> > Right now if I want to upload I seem to get into a loop where PSGS
> > keeps
> > on sending out the same frame (I presume), then disconnects, after
> > which
> > the whole cycle starts over again.
> >
> > From the PSGS debugging info you can see that I am successful in
> > logging into PFS3-12. My file gets a designated ID (1f14 in this
> > case)
> > and is ready to be received. Then it uploads what I presume is one
> > frame
> > (you can see this in Direwolf where the same chunk of data is send
> > over
> > and over again) after which possibly the reason why things don't
> > work:
> > "ER_BODY_CHECK received while uploading:
> > /home/hans/PacSatGroundData/FalconSat-3/BX2ABT17.txt.out". The only
> > mention of ER_BODY_CHECK I can find on the internet is that it is
> > sent
> > when the checksum on the file body fails. After that the whole
> > sequence
> > starts again, so the message never gets uploaded and out of the
> queue.
> >
> > Does this problem lie with FalconSat-3, Direwolf or PGSG, or
> > somewhere
> > else? Where is the checksum being made? This is my first forray into
> > packet radio/PacSat, so I'm not an expert (yet). I don't want to make
> > any (un)educated guesses, thus any help or hints are appreciated.
> > Cheers,
> >
> > Hans
> > BX2ABT
> >
> >
> >
> > This is the output (with debugging turned on) of PSGS:
> >
> > --------BEGIN-------
> > Open ABCD:
> > Ready to upload file: BX2ABT17.txt.out
> > B: 209908947.
> > U>>
> > DEBUG 3: Open: Adding UP LINK Event: UL_CONNECT
> > PB: Empty..
> > I>>From:PFS3-12 to BX2ABT Ctrl: 0 Type: I Cmd PF: 0 NR: 0 NS: 0
> > 5 2 cc
> > a7 fb 5c 4> SUCCESSFUL LOGIN to PFS3-12 by BX2ABT
> > DEBUG 3: Open: Adding UP LINK Event: From:PFS3-12 to BX2ABT Ctrl: 0
> > Type: I Cmd PF: 0 NR: 0 NS: 0 5 2 cc a7 fb 5c 4> SUCCESSFUL
> > LOGIN to
> > PFS3-12 by BX2ABT
> > DEBUG 3: Cmd Ok: Adding UP LINK Event: UL_REQUEST_UPLOAD
> > DEBUG 3: Cmd Ok: UL_CMD: From:BX2ABT to PFS3-12 Ctrl: 0 Type: I
> > Cmd PF:
> > 0 NR: 0 NS: 0 8 3 14 1f 0 0 31 3 0 0 UL CMD: UPLOAD_CMD File: 1f14
> > Size: 331
> > S>>
> > I>>From:PFS3-12 to BX2ABT Ctrl: 22 Type: I Cmd PF: 0 NR: 1 NS: 1
> > 8 4
> > 14 1f 0 0 31 3 0 0> Ready to receive file: 1f14 from BX2ABT at
> > off: 817
> > DEBUG 3: Waiting: Adding UP LINK Event: From:PFS3-12 to BX2ABT
> > Ctrl: 22
> > Type: I Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to
> > receive
> > file: 1f14 from BX2ABT at off: 817
> > DEBUG 3: Waiting: UL_GO_RESP: From:PFS3-12 to BX2ABT Ctrl: 22
> > Type: I
> > Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive
> > file:
> > 1f14 from BX2ABT at off: 817
> > DEBUG 3: Waiting: GO FILE>From:PFS3-12 to BX2ABT Ctrl: 22 Type: I
> > Cmd
> > PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive file:
> > 1f14
> > from BX2ABT at off: 817
> > DEBUG 3: Data: Adding UP LINK Event: UL_DATA_END
> > DEBUG 3: Data: UL_DATA_END: UL_DATA_END
> > S>>
> > I>>From:PFS3-12 to BX2ABT Ctrl: 44 Type: I Cmd PF: 0 NR: 2 NS: 2
> > 1 7
> > 10> UL NAK 16: ER_BODY_CHECK
> > DEBUG 3: Data End: Adding UP LINK Event: From:PFS3-12 to BX2ABT
> > Ctrl: 44
> > Type: I Cmd PF: 0 NR: 2 NS: 2 1 7 10> UL NAK 16: ER_BODY_CHECK
> > DEBUG 3: Data End: UL_NAK_RESP: From:PFS3-12 to BX2ABT Ctrl: 44
> > Type: I
> > Cmd PF: 0 NR: 2 NS: 2 1 7 10> UL NAK 16: ER_BODY_CHECK
> > NAK: ER_BODY_CHECK received while uploading:
> > /home/hans/PacSatGroundData/FalconSat-3/BX2ABT17.txt.out
> >
> > TIME-1: PHT: uptime is 469/13:51:30. Time is Sat Jun 08 12:19:29
> > 2019.
> > U>>
> > DEBUG 3: Idle: Adding UP LINK Event: UL_DISCONNECTED
> > DEBUG 3: Idle: Adding UP LINK Event: Open ABCD:
> > Open ABCD:
> > B: 209908947.
> > PB: Empty..
> > ---------END-------
> >
> > This is what Direwolf's output is:
> >
> > --------BEGIN-------
> > PFS3-1 audio level = 68(+118/-110) [NONE] |||||||||
> > [0.4] PFS3-1>LSTAT:I P:0x13A8 o:0 l:31473 f:31529, d:1 st:4
> e:26<0x0d>
> > Unknown APRS Data Type Indicator "I", Ambulance
> > [0L] BX2ABT>PFS3-12:(SABM cmd, p=1)
> >
> > PFS3-12 audio level = 69(+115/-111) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(UA res, f=0)
> >
> > PFS3-12 audio level = 70(+119/-110) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(I cmd, n(s)=0, n(r)=0, p=0,
> > pid=0xf0)<0x05><0x02>^<0xa8><0xfb>\<0x04>
> > [0L] BX2ABT>PFS3-12:(I cmd, n(s)=16, n(r)=120, p=0,
> > pid=0x08)<0x08><0x03><0x14><0x1f><0x00><0x00>1<0x03><0x00><0x00>
> >
> > PFS3-12 audio level = 70(+121/-110) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(RR res, n(r)=1, f=0)
> >
> > PFS3-12 audio level = 70(+121/-109) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(I cmd, n(s)=17, n(r)=120, p=0,
> > pid=0x08)<0x04><0x14><0x1f><0x00><0x00><0xfe><0x00><0x00><0x00>
> > [0L] BX2ABT>PFS3-12:(I cmd, n(s)=1, n(r)=2, p=0,
> > pid=0xf0)<0xfe><0x00>
> > the internet server that you sent me a message on April 11, but
> > unfortunately I never was able to download it. It took a while to get
> > the transmitting part working, but now it does and I'm very
> > pleased to
> > be able to contact you via FS-3. Truly an amazin
> > [0L] BX2ABT>PFS3-12:(RR cmd, n(r)=2, p=1)
> >
> > PFS3-11 audio level = 65(+118/-109) [NONE] |||||||||
> > [0.4] PFS3-11>PBLIST:PB: Empty.<0x0d>
> > Unknown APRS Data Type Indicator "P", Original Balloon (think Ham b
> >
> > PFS3-12 audio level = 66(+117/-109) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(RR res, n(r)=1, f=1)
> > [0L] BX2ABT>PFS3-12:(I cmd, n(s)=33, n(r)=120, p=0,
> > pid=0x08)<0x08><0x03><0x00><0x00><0x00><0x00>1<0x03><0x00><0x00>
> >
> > PFS3-12 audio level = 74(+125/-111) [NONE] |||||||||
> > [0.4] PFS3-12>BX2ABT:(DISC cmd, p=1)
> > [0L] BX2ABT>PFS3-12:(UA res, f=1)
> > --------END-------
> >
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org>. AMSAT-NA
> > makes this open forum available
> > to all interested persons worldwide without requiring membership.
> > Opinions expressed
> > are solely those of the author, and do not reflect the official
> > views of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]
More information about the AMSAT-BB
mailing list