[amsat-bb] TM Decoding Issue

[Andrew Glasbrenner]

It's not going to work through the RigBlaster, as it filters the low audio
out. You have to pull the audio with -no- filtering, from either the 9k6
packet port, or from an SDR without filtering.

73, Drew KO4MA

-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces at amsat.org> On Behalf Of Al Rothermich
Sent: Friday, March 08, 2019 4:13 PM
To: amsat-bb at amsat.org
Subject: [amsat-bb] TM Decoding Issue

Has anyone successfully decoded Telemetry from the Fox satellites using an
IC-910H and a Rigblaster Pro Advantage? I have had no luck locking onto the
TM signal, and I'm wondering if there is a built in high pass filter that's
causing the issue. Any help would be appreciated.

Al - WB0QLU
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb