[amsat-bb] FS-3 pacsat u/l

[Mark D. Johns]

Some have modified the rig. See, for example,
https://dc1rjj.darc.de/IC-9100_PTT-CW_via_USB_modification.pdf
Another solution is a little Windows utility program by ND0B called
ICOMkeyer.exe
--
Mark D. Johns
KØJM / MØGZO / ex-9H3DJ / ex-KØMDJ
Brooklyn Park, MN USA   EN35hd
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
   you would stay out and your dog would go in."
    ---Mark Twain


On Thu, Mar 14, 2019 at 3:31 PM kb2mjeff at att.net <kb2m at arrl.net> wrote:
>
>
> Moving off my 30 year old TNC due to poor data performance. The old
DSP2232 has done it's job. I'm now in the middle of setting up a software
based modem system using my  IC-9100, EasyTerm, and HS_SoundModem. The data
D/L performance really blows away the hardware based modem. This somewhat
surprises me as 20 years ago, we as a group did simultaneous  d/l tests
using S/W and H/W modems, and at the time the hardware was far superior.
The S/W modems and CPU's driving them have come a long way.
>  Anyway what my  problem is, how to activate PTT with this setup. I had
this working a few years ago, but forgot what I did. Where I'm at now, I'm
using vspMgr to try and split the IC-9100's PTT serial port, but no joy. Do
I need to split the port? Or use VOX? Any one get this working? Thanks...
>
> 73 Jeff kb2m
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
Opinions expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb