[amsat-bb] IC-9700 + 9600 baud packet?
Stefan Wagener
wageners at gmail.com
Sat Nov 2 01:26:24 UTC 2019
While I have no need for 9K6 on my IC-9700, I certainly understand those
that have and yes, if more folks can contact Icom it might help. and I will
do that on my end.
Now, having said that, it is also imperative that those folks designing
satellites with certain modes of operation take a serious look at
*available* hardware/software that is used by a majority of amateur radio
operators, if and I say "if" they like a broad response from the community.
If not, you can be as esoteric as you like with satellites knowing that you
limit their use to a few.
My 2 cents,
Stefan VE4SW
On Fri, Nov 1, 2019 at 5:33 PM Mark L. Hammond via AMSAT-BB <
amsat-bb at amsat.org> wrote:
> Sadly i don’t think that is a fix. Unless Icom releases a new firmware to
> fix 9k6 bandwidth on xmit, we’re dead in the water on this one. It’s not
> just a tap in the rig or a TNC issue. It’s an SDR issue in the radio
> firmware.
>
> If anyone can influence Icom, please do so!!!!!
>
> Mark N8MH
>
> On Sat, Nov 2, 2019 at 5:45 AM Gregory Beat via AMSAT-BB <
> amsat-bb at amsat.org>
> wrote:
>
> > Sounds like an opportunity for SYMEK (German company closed 2014),
> > that offered various high-speed add-on boards for AMSAT satellite
> > operators.
> > http://www.symek.com/g/index-g.html
> >
> > greg
> > w9gb
> > ==
> > Message
> > Date: Thu, 31 Oct 2019 16:28:40 -0700
> > From: Kevin <wa7fwf at gmail.com>
> > To: Charles Reiche <charlieray at gmail.com>
> > Cc: AMSAT BB <Amsat-bb at amsat.org>
> > Subject: Re: [amsat-bb] IC-9700 + 9600 baud packet?
> >
> > Charles,
> > A bunch of us spent a long time trying to get this to work, I tried with
> > my Kantronics 9612.
> > Icom was asked many times where the bottleneck is, hardware? firmware?
> and
> > they refuse to say one way or the other.
> > Their only answer has been that "we" (radio amateurs) should have seen
> > them removing 9600 packet support from the mobile market,so it should
> have
> > been no big surprise that they removed it from the 9700.
> >
> > 73 Kevin WA7FWF
> >
> >
> > Sent from iPad Air
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> --
> Mark L. Hammond [N8MH]
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
More information about the AMSAT-BB
mailing list