[amsat-bb] SatPC32 with BOTH an IC-9700 and HDSDR (and RSP2 SDR)?

[John]

Bob,

If HDSDR will do the same as SDR Console, and emulate a TS2000 as far as CAT
is concerned, you could use the helper app I use that a friend of mine - Tom
M0LTE - wrote for me:

https://github.com/M0LTE/satpc32-dde-utils

It listens to the SatPC32 DDE stream, and pushes the frequency and mode to
SDR-Console (or whatever is configured to pretend to be a TS2000 on the COM
port you specify) in real time.

73,
John (M5ET)

-----Original Message-----
From: AMSAT-BB <amsat-bb-bounces at amsat.org> On Behalf Of Bob Hammond via
AMSAT-BB
Sent: 10 November 2019 16:11
To: amsat-bb at amsat.org
Subject: [amsat-bb] SatPC32 with BOTH an IC-9700 and HDSDR (and RSP2 SDR)?

I have SatPC32 controlling my IC-9700.  I'd like to control HDSDR (and my
RSP2 SDR) as well at the same time.

I acquired VSP Manager from K5FR as a solution but I struggle to get it to
work with both radios simultaneously.  The virtual ports show up ok and I
can configure them but I don't get control of the SDR.  And the IC-9700
control stops.  Yes, the ports used for each radio are different.

Should I use the DDE function as described in section C3 of the SatPC32
manual?

I'm using Win7 and USB ports, of course.

Anyone have some tips to share?

Bob
W7OTJ
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb