[amsat-bb] Ic-7100 and satpc32

[Kenneth P Alexander]

I asked this question a few months ago and was told Satpc32 and a 7100 will
work fine together.  What I was most concerned about when I asked was
whether Satpc32 could adjust the 7100's transmit frequency while
transmitting,  and it turns out it can.

You can't do this with  Yaesu, i.e., Satpc32 cannot adjust the transmit
freq while transmitting, so Satpc32 will wait until the rig is not
transmitting and then make the adjustment.

Hope this helps!

Ken Alexander VE3HLS
So Phisai, Thailand
Blog:  bueng-ken.com

On Sat, Nov 16, 2019, 09:42 Richard Lawn via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> I’m in the process of building a satellite station at our vacation house.
> I am planning on using my K3/P3 with downconverters for receive. I’m
> considering using a ic-7100 for the uplink but am not certain it is
> compatible with SatPC32. Is anyone using the 7100 in this way? It’s either
> that or the FT-991.
>
> Rick, W2JAZ
>
> Sent from my iPhone
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>