[amsat-bb] IC-910 problem

[John Kludt]

Bob,

The IC-910H is very sensitive to voltage drop from the power supply.  Icom
recommends that the power cable be no more than 36 inches long and is of a
heavy gauge.  Not sure what you are using for a power supply - my IC-910H
works best with a 35 amp Astron Linear supply.

John

On Wed, Oct 23, 2019 at 12:06 AM 73 Bob W7LRD via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Hi- Just encountered problem, if I key the tx at high power fm/cw the rig
> shuts down momentarily.  At half power it operates normally this only on 2M
> uhf/L ok.  Ideas anyone?
> thanks & 73
> Bob W7LRD
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>