[amsat-bb] IC-9700 + 9600 baud packet?

[Kevin]

Charles,
    A bunch of us spent a long time trying to get this to work, I tried 
with my kantronics 9612.
    Icom was asked many times where the bottleneck is, hardware? 
firmware? and they
refuse to say one way or the other. Their only answer has been that "we" 
should have seen
them removing 9600 packet support from the mobile market so it should 
have been no big
surprise that they removed it from the 9700.

    73 Kevin WA7FWF




On 10/31/2019 16:13, Charles Reiche wrote:
> Even if we use an external modem into the ACC port? Is it a signal 
> width limit problem?
>
> On Thu, Oct 31, 2019, 6:01 PM Kevin via AMSAT-BB <amsat-bb at amsat.org 
> <mailto:amsat-bb at amsat.org>> wrote:
>
>     Cathryn,
>        If someone wrote the software to use it you could receive 9600
>     packet
>     from the IF output but you have no way of sending the reply as a
>     ic-9700
>     will not transmit 9600.
>     Talking to Icom (many times) they feel that 9600 is a dead mode but
>     somehow RTTY on VHF/UHF is not...
>
>     73
>     Kevin WA7FWF
>
>
>     On 10/31/2019 13:37, Cathryn Mataga via AMSAT-BB wrote:
>     > I think I missed something here? With all the comments about
>     FoxTelem,
>     > I'm not sure. Does this mean with the I/Q output, the IC-9700
>     can do
>     > 9600 baud packet/telemetry? (Curious because this was kind of a
>     deal
>     > killer for me.)
>     >
>     >
>     > _______________________________________________
>     > Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org>.
>     AMSAT-NA makes this open forum available
>     > to all interested persons worldwide without requiring membership.
>     > Opinions expressed
>     > are solely those of the author, and do not reflect the official
>     views
>     > of AMSAT-NA.
>     > Not an AMSAT-NA member? Join now to support the amateur satellite
>     > program!
>     > Subscription settings:
>     https://www.amsat.org/mailman/listinfo/amsat-bb
>     >
>
>     _______________________________________________
>     Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org>. AMSAT-NA
>     makes this open forum available
>     to all interested persons worldwide without requiring membership.
>     Opinions expressed
>     are solely those of the author, and do not reflect the official
>     views of AMSAT-NA.
>     Not an AMSAT-NA member? Join now to support the amateur satellite
>     program!
>     Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>