[amsat-bb] BugSat-1 (Tita) and its digipeater

[Scott]

On the 0719 UTC pass tonight (07-Sept-2019) I cleanly decoded a number of
9k6 packets from BugSat-1, but had no luck getting digipeated with 9k6
packets uplinked on 437.445 transmitted to "CQ via LU7AA".

Could you please provide any additional information about the path required
for the satellite to accept uplink packets?  I tried normal APRS-type
messages as well as a plain message with the payload " ?DX? " as indicated
in your previous reply below.

A tweet with several screen shots may be seen at:

https://twitter.com/scott23192/status/1170245596709576709

Thank you very much for any additional information about how the digipeater
can be accessed.

-Scott,  K4KDR

===========================

On Fri, Sep 6, 2019 at 2:28 PM Amsat Argentina via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Hello Hans,
>
> Thanks for decoding TITA Tlm.
>
> Tita digi is active at 9K6 AFSK, call=LU7AA, also a ?DX? command should
> give stations heard.
>
> Passes & Frequencies at http://amsat.org.ar/pass?satx=tita Pwr is 2W.
>
> Good Luck !
>
> 73, LU7AA, AMSAT Argentina
> http://amsat.org.ar
>