[amsat-bb] Fox Delta ST2 issue

[Peter Goodhall (2M0SQL)]

I'd suggest recalibrating it as you did on the first setup as per
Foxdeltas ST2 guide.

Peter, 2M0SQL

On Sun, 16 Aug 2020 at 20:36, D. Craig Fox via AMSAT-BB
<amsat-bb at amsat.org> wrote:
>
> Greetings all. I searched the amsat BB archive but found no answer so posting this. For no apparent reason, my FD st2 connected to my G5400 has just started misbehaving after working great for months. Using W10. It is displaying incorrect AZ, while EL is correct.  It parks the G5400  at 225 deg instead of default 300.  It will show EL in excess of 500+ deg when manually turning the G5400 clockwise. I have the most current driver for my usb-serial cable. Im thinking I need to reset the EPROM but an find no directions on the FD website or internet on how to do this after initial setup.  I will email Dinesh at FD if no answers.
> Any help would be appreciated.
> Thank you and 73 from OC DM13
>
> Craig
> N6RSX
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb