[amsat-bb] IC-9700 Remote Control

[Michael Walker]

Stephan

I can tell you about Flex if you like.  I use a 6600M with 2 transverters
remote with SatPC32.  It is nice to have a much more detailed waterfall
than the IC-9700 (down to about 5hz/pixel).

I could do it with the IC-9700 I have, but the configuration is a bit more
complicated and I will actually be parting with the IC-9700 sometime soon
since I don't do any 1.2Ghz.

Mike va3mw


On Sun, Aug 23, 2020 at 11:03 AM Stephan Greene via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Looking at setting up a remote base satellite station to escape local
> increasing RFI, foliage, adverse terrain etc... I've been studying
> successful implementations using TS2000, FlexRadios, etc.and software
> SatPC32, FLRig, DXCommander, VNC, NX, etc... and may end up going one of
> those ways.  Also looking at IC-9700.
>
> If you've successfully used an IC-9700 remotely, please email me direct.
> What software are you using, remote access method, additional accessories
> or items you found particularly handy.
>
> Thanks in advance!  73 de KS1G
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>