[amsat-bb] SatPC32 - need help with configuration of Doppler.SQX file
Michael Walker
va3mw at portcredit.net
Tue Dec 1 13:22:19 UTC 2020
Delete the (DOSAFF-85) part
Here are my 2. I have the Beacon first so that the receiver is on the
Beacon when I first go there.
The 2nd one puts the radio in the middle of the passband with my
adjustments. You may have to fine tune your uplink.
73
Mike va3mw
RS-44,435605,,USB,,REV,0,0,Beacon
RS-44,435640,145964.9,USB,LSB,REV,0,0,SSB
On Tue, Dec 1, 2020 at 3:10 AM Bill Dzurilla via AMSAT-BB <
amsat-bb at amsat.org> wrote:
> I was just advised that, contrary to the RS-44 line in the JE9PEL file,
> it should be REV rather than NOR. If so, that would explain a lot.
> 73, Bill NZ5N
> On Monday, November 30, 2020, 02:10:53 PM EST, Bill Dzurilla <
> billdz.geo at yahoo.com> wrote:
>
> Hello,
> Does anyone have any tips for proper configuration of the Doppler.SQX file
> on SatPC32? I'm having a hard time getting it correct for RS-44.
> I started with the standard line from JE9PEL: RS-44
> (DOSAAF-85),435640,145965,USB,LSB,NOR,0,0,SSB
> When I heard the sat, I started clicking the Uplink Calibration buttons in
> the CAT Control window until my voice sounded natural. It was pretty far
> off, something like 8800hz. To save, I clicked on Change/Store Data File
> and then clicked RX/TX Freq. Data. I thought this was all I needed to do,
> but on the next pass my TX and RX were again out of sync. On every pass, I
> need to start over, and each time the uplink frequency is several thousand
> hertz off. My current line is: RS-44
> (DOSAAF-85),435631.85,145970.86,USB,LSB,NOR,0,0,SSB
> What am I doing wrong?
> Thanks and 73, Bill NZ5N
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
More information about the AMSAT-BB
mailing list