[amsat-bb] FoxTelem

[Burns Fisher]

Nasabare has it with the name HuskySat-1.  I'm not sure if that this the
name by default in FoxTelem.  Just pull down the "spacecraft" menu and look
at the top line "Name (for keps)" and change it to HuskySat-1 if it is not
that already.  After that you should be good.

At this point we are still learning how to work best with FoxTelem.
Different people have better luck with the "Costas" decoder or the DP
decoder (radio buttons on the top of the main screen).  And you seem to
need a fairly strong signal at this point.  I need a beam and a preamp for
example.

No experience with SDRConsole.

Thanks for collecting telemetry!  UW and AMSAT are both pleased to get more!

On Mon, Feb 3, 2020 at 10:48 AM James Jipping via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Good Morning.
>
> Getting setup to copy telemetry from HuskeySat-1.  Are the Keps for the
> bird correct in FoxTelem and/or SDRConsol/ satellites??
> Is NasaBare.txt correct ??  I can track using SatPC32  w/Foxtelem/
> FUNCube Pro or SDRConsol w/wispdde/ FUNCube Pro.  Any advice ?? Thank you!!
>
> Jim , W8MRR (AMSAT #5512)
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>