[amsat-bb] Corrected Husky-1 Telem Frequency

[Mark L. Hammond]

Hi Mike,

If you're using AF in Foxtelem (meaning, not IQ...), I suggest you try to
get the carrier frequency around 1400-1500 at AOS.    It shows up in very
light grey text, between the two "wave forms"...if you look carefully,
you'll see it.    These details are only as good as the TLE data!  So
update frequently, especially now right after launch (maybe every couple of
days?).

Currently, here is what I use in SatPC32--but it varies by radio to get the
1400-1500 Hz carrier!

For my TS-2000x:
HuskySat-1,435799.8,145950.0,USB,LSB,REV,0,0,Telem Beacon

For my IC-9700:
HuskySat-1,435798.4,145950.0,USB,LSB,REV,0,0,Telem Beacon

Hope that helps with both specifics as well as strategy!

73,

Mark N8MH


On Wed, Feb 5, 2020 at 12:18 AM Mike Lucas via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> Would someone please repost the corrected downlink Telem frequency to use
> for Doppler control.
>
> Thanks!
>
> Mike N7ASZ
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
Mark L. Hammond [N8MH]