[amsat-bb] Yaesu-736R w/HS 736USB

[Chris Thompson]

Hi Mike,

It's never been able to reverse the band split from CAT commands.  If you
are sitting at the radio and operating it's not a big issue.  You just take
it out of CAT, reverse the split then put it back into CAT mode. If you are
operating in an automated way through a sat like FalconSat-3 then you have
to dedicate it to one split direction.  Mine sits monitoring 70cm and
transmits to FalconSat-3 on 2m.

I suppose it might be possible if you don't need to transmit to have it in
normal mode (not sat mode) and then it will tune to the needed bands.
 That might work for monitoring telemetry on more than one band, though I
have not tried it.  I use SDRs for that.

73
Chris

On Sun, Feb 9, 2020 at 7:08 PM Mike Lucas via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> I hate to give up on my trusty 736R I've used for years but.  I got the
> 736USB for CAT interface and it works fine except for one thing.  I doesn't
> want to do reverse band splits with the CAT.
>
> It's documented in the HS 736USB sheet that it may not be able to perform
> that function, so I'm wonder if anyone by chance has figured out a work
> around?
>
> Thanks!
>
> Mike N7ASZ
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
Chris E. Thompson
chrisethompson at gmail.com
g0kla at arrl.net