[amsat-bb] Error accessing FunCube Pro from FoxTelem

[Joseph Armbruster]

Lib USB!? I thought Howard told me at the symposium (circa 2008) that they
were using usb-hid ?!?!?

Howard...?  Or was that on the hardware-side?

Joseph Armbruster
KJ4JIO

On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Good Evening!
> While attempting to use my FunCube Pro directly from FoxTelem I get an
> error:
> LIBUSB_ERROR_NOT_FOUND.   An internet search has found mentions of the
> error but no solutions for my situation.  I am using Windows 10 for the
> OS on my comupter.   Any thoughts or suggestions ??
>
> By the way, I use SDRConsole and feed the audio via VB_Audio Virtual
> Cable with GREAT results.  I even have RSDConsole with WispDDE running
> the antenna rotor controller.  I thought I would try the direct feed
> FoxTelem- to-FunCube before I set up My Raspberry Pi for "Fox-in-a-Box"
>
> One last question, while I'm here:  Is there any way FoxTelem without
> SDRConsol, with a DDE program , could run the rotor controller?
>
> Thank you for you help.
>
> Jim Jipping, W8MRR
> AMSAT # 5512
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>