[amsat-bb] PacsatGround Software

[Chris Thompson]

Kevin,

Let me know any more details on the COM port bug.  It should not do that :)

I logged it on github and will try to fix at some point.

73
Chris

On Sat, Jun 6, 2020 at 3:02 PM Kevin via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> Mike I tried replying privately but it bounced as "address couldn't be
> found, or is unable to receive mail".
>
> so here it is again
>
> Hi Mike,
>   I run a 9612+ with pacsatground try this...
>
> Using putty or any other terminal program issue the following
>
> port 2
> cd ext/ext
> fulldup off/on
> mon off/on
> maxusers 0/1
> int kiss
> reset
>
> once you enter the reset you will now be in kiss mode and can no longer
> issue commands
>
> exit your terminal program
>
> now startup pacsatground and you should be in business
> make sure in pacsatground you turn off toggle out of kiss mode on exit
> or you will have to go through these steps each time you start it
>
> also I have noticed a bug where you exit pacsatground and the next time
> you start it says it cannot open the com port
> I'm thinking it leaves it in a odd state, to fix just go into windows
> device mgr and disable and then enable the com port and it should now work.
>
> Let me know if this does it for you.
>
>
> 73
> Kevin WA7FWF
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
Chris E. Thompson
chrisethompson at gmail.com
g0kla at arrl.net