[amsat-bb] Setting Doppler for SSB Satellites in Doppler.sqf

[Dave Webb KB1PVH]

Brian,

 Typically the frequencies in the doppler.sqf are center of the passband.

Dave-KB1PVH


Sent from my Galaxy S9

On Sun, Jun 21, 2020, 3:28 PM Brian Wilkins KO4AQF via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> For setting the uplink and downlink frequencies in doppler.sqf, do I set it
> to one of the many frequencies starting with the AOS and the software will
> adjust from there?
>
> For example, using ke0pbr frequency cheat sheet for XW-2F, if I wanted to
> stay approx center, in Doppler.SQF, I would set the file to 435330.0 for
> uplink LSB and downlink I would set it to 145990.0
>
> If on another pass I wanted to start somewhere else, I could set it to
> 435340.0 and 145980.0.
>
> In example 1, the software would adjust from 435330.0 to 435350.0 as the
> satellite passes over me. (AOS to LOS).
> --
> Brian Wilkins
> KO4AQF
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>