[amsat-bb] Trying to get back on the sats... but G-5500 Failure

[Burns Fisher]

So far, my problems with the 5500 have all been with the cables.  One time
a mouse chewed through it.  Another time I discovered the bolt on my surge
protector terminal was not tight.  Not to say the 5500 never has hardware
problems.  One thing I'd look at is whether it is literally not rotating
when power is applied, or whether it is the feedback pot/wiring that is
bad.  Worth a check so you can trace the wiring better

But one interesting question is what elevation your antenna is frozen at?
You could be successful for a while at either end of the pass if it is
horizontal (depending on the beam width of your antennas).  Maybe a bit
more challenging if it is vertical.

On Fri, Mar 27, 2020 at 5:50 PM Michael Hatzakis Jr MD via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Jerry,
>
> Just for perspective.   That rotor has been up for 15 years or more.  Been
> through multiple major storms, snow, ice, etc and has been flawless for
> that entire time.  This is the first failure in all that time, and more
> than likely related to sitting dormant for 6 years.   So, I would say, that
> is pretty darn good.   Can’t speak for others, but I don’t have an issues
> with that duration of a failure free period.
>
> Michael Hatzakis Jr MD. K3MH
>
>
>
> > On Mar 27, 2020, at 2:21 PM, Gerald Witalec <jplanner at sbcglobal.net>
> wrote:
> >
> > Hi Michael,
> > Been reading a lot on the AMSAT-BB and amazed about how many of you are
> having problems with such an expensive rotor.
> > I have decided not to purchase it and going to build my SAT station
> instead with servo motors.
> >
> > Jerry...W8RQM
> >
> > On Friday, March 27, 2020, 4:58:27 PM EDT, Michael Hatzakis Jr MD via
> AMSAT-BB <amsat-bb at amsat.org> wrote:
> >
> >
> > Hi guys/gals,
> >
> > I used to be very active on the Sats, and for years; have a great
> set-up, but thanks to life events, went dark for about 5-6 years.
> >
> > Trying to find a silver lining in this COVID crisis, while my business
> is in the tank, thought I would get back to my love of the birds.
> >
> > Unfortunately, I turned on my G-5500 controller and suddenly find the
> elevation portion of the rotor isnt responding. Rotation is fine.  Thanks
> to my fearless days of my 40’s, the antenna is up on the chimney in a set
> up thats a little challenging to service, so I am looking for what I can do
> on the ground to try to debug and prepare first, before embarking on a roof
> expedition.
> >
> > What are the common reasons for the elevation rotator to stop
> responding?  is there much I can do on the ground to debug, and/or prepare
> when I go up on the roof to check the rotor out?  What are the repair
> options?
> >
> > Michael Hatzakis Jr MD  K3MH
> > mail at hatzakis.net <mailto:mail at hatzakis.net> <mailto:mail at hatzakis.net
> <mailto:mail at hatzakis.net>>
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. <mailto:AMSAT-BB at amsat.org.> AMSAT-NA
> makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb <
> https://www.amsat.org/mailman/listinfo/amsat-bb>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>