[amsat-bb] SatPC32 and the Green Herron Rotor Controller

[Dave Webb KB1PVH]

Hit send too soon. After you select the rotors then you need to go to
Communication > AZ Com port and select the com port for AZ then do EL/AZ+EL
Com port and select the com port for the EL

Dave-KB1PVH


Sent from my Galaxy S9

On Thu, May 7, 2020, 1:34 PM Dave Webb KB1PVH <kb1pvh at gmail.com> wrote:

> Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller
> > RT-21 Green Heron
>
> Dave-KB1PVH
>
>
> Sent from my Galaxy S9
>
> On Thu, May 7, 2020, 1:22 PM Peter <pgprendergast at yahoo.com> wrote:
>
>> I'm not seeing the Green Herron dual alt az RT21 as a choice or even how
>> to set its serial lports??
>> Peter
>>
>> On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH <
>> kb1pvh at gmail.com> wrote:
>>
>>
>> Peter,
>>
>>  You can set DDE output in SatPC32 and also use a DDE client like the one
>> from Green Heron called GH Tracker or  what I do is run PSTrotator which
>> supports the Green Heron for rotor control and run SatPC32 for radio
>> control. Just be aware if you use DDE output you will lose the ability to
>> park antennas after a pass and also the ability to have antennas start
>> before a pass.
>>
>> Dave-KB1PVH
>>
>>
>> Sent from my Galaxy S9
>>
>> On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB <amsat-bb at amsat.org>
>> wrote:
>>
>> So, I do not see as a choice the Green Herron RT21 Alt Az
>> rotorcontroller?????
>> How can I get the program to control the antennas???ThanksPeterW2PP
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>>