[amsat-bb] RS-44 on LOTW?
Bernie and Cheryl
hamdan at ix.netcom.com
Wed May 13 23:27:15 UTC 2020
Thanks to everyone who replied. And yes, Tucker, I am using HRD for my
logging, and therein lay my problem.
Here's what the problem was. I originally had a problem uploading RS-44
QSO's to LOTW. Several here on the list replied to my original post and
suggested that my version of TQSL might be outdated. So, I downloaded
Version 2.5.3. This resulted in a situation where NO QSO's could be
uploaded, including non-satellite contacts, such as HF contacts.
Tucker's question about using HRD (aka, Ham Radio Deluxe, of which I am
using the latest version, i.e, V6.7.0.277) and his link to the HRD blog
sent me off in the right direction. It turned out that the "Station
Location" data I had first input into HRD included the use of the word
"Colorado" rather than the postal abbreviation of "CO". TQSL now
interprets the use of the full spelling of a state, as opposed to its
postal abbreviation as an "error", and won't allow the log entry to be
uploaded. Once I changed the home state field in my HRD program, I went
out and worked someone and was able to upload that new QSO to LOTW
immediately.
But, what about my old QSO's that I hadn't uploaded yet? It turns out
that BOTH states need to use the postal abbreviation. In other words,
not only does the entry for the state of my station need to use the
postal abbreviation, but now the state of the station I am working needs
to be changed to use the postal abbreviation. If this is not done both
ways, the QSO can't be uploaded. So, I went back to my RS-44 QSO's, and
had to change a few QSO's to the respective postal abbreviations (there
were only about 3-4 our out of 19 QSO's like this, and yet none of them
could be uploaded in the same attempt). After doing that, all of my
RS-44 QSOs were uploaded to LOTW without a problem.
I'm not sure that what the programmers for TQSL did was an improvement.
But, I can testify to the fact that I learned a great lesson in
patience, so maybe that was the whole point??? I hate software updates!
Thanks to Tucker, KI7UNJ, and the rest of you for your helpful replies.
See you on the birds!
73 de Bernie, KF0QS
On 5/12/2020 7:29 AM, KI7UNJ Tucker wrote:
> You using HRD by chance for your logging?
>
> Here is a post from my local club about HRD And the new version of TQSL
>
> **************
> It turns out that you are right, the problem appears to be in the Log
> file created by HAM Radio Deluxe. This article tells us how to fix it:
> https://www.hamradiodeluxe.com/blog/TQSL-v252-TipsnTricks-for-Correcting-Your-Log-Data.html
> <https://www.hamradiodeluxe.com/blog/TQSL-v252-TipsnTricks-for-Correcting-Your-Log-Data.html>
>
> Rick Murphy provided that pointer:
> https://groups.arrl.org/g/ARRL-LoTW/message/32757?p=,,,20,0,0,0
> *****************
>
> https://groups.arrl.org
> <https://groups.arrl.org/g/ARRL-LoTW/message/32757?p=,,,20,0,0,0>On
> Tue, May 12, 2020 at 06:22 KI7UNJ Tucker <ki7unj at gmail.com
> <mailto:ki7unj at gmail.com>> wrote:
>
> Good morning
>
> For the BB when you want to respond do a “reply all” that will
> reply to both the person whom responded and back to the BB. now if
> that person only did a reply to you and not to the BB you can add
> the BB email on the to list with there name if you want the
> response to go to the BB.
>
> As for TQSL... I assume your using a logging software and it’s
> sending the data to TQSL? If so TQSL changed a bit in what it
> expects in the log 2 versions ago and many logging apps need to be
> updated. I’ll try and find the post about it and forward it to you.
>
>
> On Mon, May 11, 2020 at 22:15 Bernie and Cheryl
> <hamdan at ix.netcom.com <mailto:hamdan at ix.netcom.com>> wrote:
>
> Hi Tucker:
>
> We've worked on the birds several times. Indeed, I believe
> we've exchanged QSL's.
>
> I have a couple of questions if you don't mind. First, I
> downloaded the newest version of TQSL. Now, it refuses to
> upload /any /contacts. I get the following screen when I try
> to upload: "Failed to sign the ADIF with TQSL, see logfile for
> more info." Do you know what the problem is?
>
> Secondly, so that I don't have to pester you with every
> question, how do I respond to a post on the AMSAT board so
> that the whole board can read it? Obviously, I can respond to
> individuals who replied to my original post using direct email
> (at least I know how to do original posts), but I don't know
> how to respond on the board itself.
>
> Thanks, and hope to see you on the birds soon.
>
> 73 de Bernie, KF0QS
>
> On 5/10/2020 1:44 PM, KI7UNJ Tucker wrote:
>> RS-44 is in LOTW, I have multiple QSL in LTOW from it. You
>> will need to update your TQSL (came out May 1st) with the
>> latest config. and make sure you have sat = "RS-44"
>>
>>
>>
>>
>> On Sun, May 10, 2020 at 11:53 AM Bernie and Cheryl via
>> AMSAT-BB <amsat-bb at amsat.org <mailto:amsat-bb at amsat.org>> wrote:
>>
>> Dear Folks:
>>
>> I have been uploading my QSO's to LOTW fairly quickly. I
>> have noticed
>> that none of my RS-44 QSOs show up. Is this happening
>> for everyone? If
>> not, what am I doing wrong?
>>
>> Thanks, in advance, for any help you can give me.
>>
>> 73 de Bernie, KF0QS
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org <mailto:AMSAT-BB at amsat.org>.
>> AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring
>> membership. Opinions expressed
>> are solely those of the author, and do not reflect the
>> official views of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur
>> satellite program!
>> Subscription settings:
>> https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>>
>>
>> --
>> *Casey Tucker KI7UNJ*
>> https://twitter.com/KI7UNJ
>>
> --
> *Casey Tucker KI7UNJ*
> https://twitter.com/KI7UNJ
>
> --
> *Casey Tucker KI7UNJ*
> https://twitter.com/KI7UNJ
>
More information about the AMSAT-BB
mailing list