[amsat-bb] AMICALSAT Award

[christophe.mcr]

Dear

The amsatf email address is open

73's

Christophe

Le sam. 31 oct. 2020 à 17:53, Jean Marc Momple <jean.marc.momple at gmail.com>
a écrit :

> Good Evening,
>
> Address amsatf at amsat-f.org bounce back presently, probably not yet
> activated.
>
> Nice initiative from AMSAT-FR to motivate us to send TLM. Bravo Messieurs.
>
> I am already sending via Satnogs and this will surely motivate me further
> to do so in future.
>
> All the best to Amicalsat, strong signal this side.
>
> 73
>
>
> Jean Marc (3B8DU)
>
> On Oct 31, 2020, at 6:25 PM, christophe.mcr via AMSAT-BB <
> amsat-bb at amsat.org> wrote:
>
> Dear
>
> The french version is available on :
> https://site.amsat-f.org/2020/10/11/diplome-amsat-f-amicalsat/
>
> Regards
>
>  --
> *Christophe Mercier*
> *Président AMSAT-Francophone*
>
> Le sam. 31 oct. 2020 à 15:21, christophe.mcr <christophe.mcr at gmail.com> a
> écrit :
>
> Dear all
>
> The satellite has been active since September 3, 2020. The launch of the
> Vega rocket went well. According to the project team, the commissioning of
> the satellite is in progress and is proceeding normally. The team has
> succeeded in stabilizing the satellite and is beginning to test image
> capture and retrieval.
>
> The contributions of radio amateurs have been very important for the
> project. This has contributed to the commissioning of the satellite. In the
> case of AMICALSAT , it is possible to send telemetry to the dashboard
> hosted by the Satnogs network via
>
>
>   - a Satnogs station
>   - the AMICALSAT Decoder software provided by AMSAT-F. (
>
> https://code.electrolab.fr/xtof/josast/-/blob/master/ApplicationAmicalsat/src/site/markdown/UserManual.md
>   )
>   - the software edited by DK3WN (TLM Forwarder)
>
>
> Data from AMICALSAT Decoder is also sent to the AMSAT-F database (
> https://amsat.electrolab.fr/). To date, more than  42 radio amateurs from
> all over the world have contributed more than 28,000 telemetry frames.
>
> In order to thank the radio amateurs who have sent telemetry via AMICALSAT
> Decoder software before December 31, 2020, AMSAT-F will issue a diploma.
>
> *Rules for issuing the diploma*
>
> The diploma in electronic format will be given to all radio amateurs or
> earphones that have received data from the Amicalsat satellite and sent
> these data to the AMSAT-F database with the "AMICALSAT Decoder" software.
>
> Depending on the number of data received on the AMSAT-F database ((
> https://amsat.electrolab.fr/)
> ) , the nature of the diploma will be different depending on the number
> of frames received before December 31, 2020 23:59 UTC :
>
>
>   - GOLD Diploma for persons having sent more than 5000 frames to the
>   AMSAT-F database.
>   - Silver Diploma for those who have sent between 2500 & 4999 frames to
>   the AMSAT-F database.
>   - Bronze Diploma: for those who have sent between 500 & 2499 frames to
>   the AMSAT-F database.
>   - Diploma without mention for persons having sent between 1 & 499
>   frames to the AMSAT-F database
>
>
> The request for a diploma is done by sending an email to
> amsatf at amsat-f.org indicating your callsign or the name given in the
> AMSAT-F database to send the data.
>
> Only the received frames actually registered on
> https://amsat.electrolab.fr/ will be taken into account.
>
>
> Regards
>
> Christophe Mercier
> Amsat-F president
>
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
>
>