[amsat-bb] SATPC32 help

[Bruce]

I have a weird thing happening. On some of the satellites, no matter 
which way I place the frequencies, VHF,UHF or UHF, VHF the IC-9100 
always loads the 2m in the receive and the 70cm in the transmit. Thus, 
SO-50 will not work as the VHF has to be in the transmit. I change it in 
the doppler.sqf file, quit out of SATPC32 and restart it. Does not 
matter. Still loads the same way. I cannot figure this one out. Here is 
what I have tried on SO-50

SO-50,145850,436795,FM,FM,NOR,0,0
SO-50,436795,145850,FM,FM,NOR,0,0

Everything worked fine a few weeks ago prior to the radio changing the 
COM ports when I switched routers (went from COM 11 to COM 3). I have 
changed the COM port in SATPC32 for the radio. It does place the radio 
back in the same mode and frequency it was in before starting SATPC32 
when you exit the program. This means we are talking to the radio just 
fine.

Any ideas?  Please email me directly so we do not blow up the BB.

Thanks
73...bruce

-- 

Bruce Paige, KK5DO
                      
AMSAT Director Contests and Awards
AMSAT Board Member 2016-2022
   
ARRL Awards Field Checker (WAS, 5BWAS, VUCC), VE
           
Houston AMSAT Net - Wed 0100z on Echolink - Conference *AMSAT*
Also live streaming MP3 at http://www.amsatnet.com
Podcast at http://www.amsatnet.com/podcast.xml or iTunes
               
Latest satellite news on the ARRL Audio News
http://www.arrl.org

AMSAT on Twitter http://www.twitter.com/amsat