[amsat-bb] AMSAT D-Star talkgroups

[Don KB2YSI]

I only have experience with the D74a, after linking to the reflector, you
have to tell the radio to use the reflector.

On Sun, Sep 6, 2020 at 6:28 PM Keith E. Brandt, WD9GET via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> I'm having trouble with the AMSAT D-Star reflectors. I can hear traffic
> with no difficulty, but I am not heard when I transmit. Other reflectors
> work fine (30C, 1C, 4B, etc). I've tried the various alternative
> reflectors that are hooked together (DCS, XLX, XRF systems using
> reflectors 28C, SAT, and SIN). When I transmit, the Pi-Star shows me
> getting into the hotspot and it shows the reflector connected. The
> gateway pages for the reflectors sometimes show me connected, sometimes
> they don't.
>
> My hotspot is a RPi 3 running Pi-Star 4.1.2 with a DVMega board
> (firmware 3.26) -- both the newest versions
> I've tried accessing the hotspot with both my TH-D74A and Icom ID-51A
> I use the Pi-Star interface to change reflectors
> I can use the AMSAT reflectors from my Windows computer with an AMBE
> stick and BlueDV
>
> If anyone has any insights as to why my transmissions aren't getting to
> the system I'd appreciate advice.
>
> Keith WD9GET
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
73,
Don KB2YSI
https://www.hamqth.com/kb2ysi