[sarex] Re: Anyone using an FT-847 and SignaLink USB to copy ARISSat-1BPSK telemetry?

[Raydel Abreu Espinet (CL2ESP)]

Hi, I have been trying to receive the telemetry, but my conditions are not 
good, too much fading...
Can anyone tell me which mode should I chose, USB or LSB???
Thanks, and 73s
Raydel
CL2ESP

----- Original Message ----- 
From: "Alan P. Biddle" <APBIDDLE at UNITED.NET>
To: "AMSAT-BB" <amsat-bb at AMSAT.Org>; "SAREX-BB" <SAREX at AMSAT.Org>
Sent: Saturday, August 06, 2011 9:09 AM
Subject: [sarex] Anyone using an FT-847 and SignaLink USB to copy 
ARISSat-1BPSK telemetry?


> Hi,
>
> Has anyone used an FT-847 and SignaLink USB to copy, or attempt to copy, 
> the
> BPSK telemetry?  Reports of success or failure equally useful. In either
> case, it would be helpful to know approximately when the rig was
> made/purchased, due to the numerous running production mods. There have 
> been
> a few reports of people being unable to "print" the BPSK telemetry, even
> though the signal is good, and the CW decodes well.
>
> Please reply off list.
>
>
> Alan
> WA4SCA
>
>
> ----
> Sent via sarex at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/sarex
> 


=======================================================================
Este mensaje ha sido enviado mediante el servicio de correo electrónico que ofrece la Federación de Radioaficionados de Cuba a sus miembros para respaldar el cumplimiento de los objetivos de la organización y su política informativa. La persona que envía este correo asume el compromiso de  usar el servicio a tales fines y cumplir con las regulaciones establecidas.