[amsat-bb] Ic-910 and SO-50

[Erich Eichmann]

Hi Art,
SO-50 requires a 74.4 Hz sub tone on the uplink signal to be activated 
and a 67.0 Hz sub tone to be worked.
SatPC32 can set both tone frequencies.  Click the "T" control (in the 
uppler left part of the main window) to "T2" to select the 74.4 Hz tone 
and switch the radio to TX for a few seconds to activate the sat. Then 
click the  control to "T1" to set the 67.0 Hz tone. It the sat is active 
use only T1. With satellites that don't require a sub tone the functions 
are disabled.
73s, Erich, DK1TB



Am 16.04.2015 um 16:45 schrieb Arthur Payne:
> Tom I am trying to get my lc-910 to work with satPc32 to work SO-50 an
> ideas I have it tracking (I lengthened the delay) but I don't seem to be
> able to access the bird.
>
> Art VE3GNF adpayne at sympaticoca
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb