[amsat-bb] Ic-910 and SO-50

[Arthur Payne]

Thank you for your suggestions I will try them but my main concern was that
I was sure that I had the tone set but was still unable to access the bird
and wondered if I had not set the tone properly. I have just acquired the
ic- 910 I have been using an ic-820H and was not sure if I had set the tone
properly. The 820 worked with SatPC32 seamlessly but I had to set the 910
to go to satellite mode so I wasn't sure if I was setting the 910 properly.
Or if there was something that I had to do. The 910 works with all other
birds fine just not SO50.

Art VE3GNF

On Thu, Apr 16, 2015 at 1:14 PM, Erich Eichmann <erich.eichmann at t-online.de>
wrote:

> Hi Art,
> SO-50 requires a 74.4 Hz sub tone on the uplink signal to be activated and
> a 67.0 Hz sub tone to be worked.
> SatPC32 can set both tone frequencies.  Click the "T" control (in the
> uppler left part of the main window) to "T2" to select the 74.4 Hz tone and
> switch the radio to TX for a few seconds to activate the sat. Then click
> the  control to "T1" to set the 67.0 Hz tone. It the sat is active use only
> T1. With satellites that don't require a sub tone the functions are
> disabled.
> 73s, Erich, DK1TB
>
>
>
> Am 16.04.2015 um 16:45 schrieb Arthur Payne:
>
>> Tom I am trying to get my lc-910 to work with satPc32 to work SO-50 an
>> ideas I have it tracking (I lengthened the delay) but I don't seem to be
>> able to access the bird.
>>
>> Art VE3GNF adpayne at sympaticoca
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
>
>