[amsat-bb] A Little Help Please
Mike Diehl
diehl.mike.a at gmail.com
Thu Dec 8 00:24:59 UTC 2016
Jan probably had the best answer. AGWPE will handle your hardware TNC quite nicely for use with UISS. It works great with my homebrew Arduino TNC.
73
AI6GS - Mike
> On Dec 7, 2016, at 1:24 PM, PE0SAT | Amateur Radio <pe0sat at vgnet.nl> wrote:
>
> Hello Gerald,
>
> Look at AGW Packet Engine, this can be connected to a hardware TNC in kiss mode.
> When that is working connect UISS via the AGW protocol to AGW Packet Engine.
>
> So the setup would look like:
>
> UISS -- via localhost tcp port 8000 -> AGW Packet Engine -- via RS232 serial --> MFJ-1270C TNC
>
> 73 Jan PE0SAT
>
> ---
> With regards PE0SAT
> Internet web-page http://www.pe0sat.vgnet.nl/
> DK3WN SatBlog http://www.dk3wn.info/p/
> Online Telemetry Forwarder: http://tlm.pe0sat.nl/
> irc://chat.freenode.net #Cubesat - Twitter @pe0sat
>
>> On 07-12-2016 22:07, Gerald Payton wrote:
>> I am trying to install equipment for packet communication through ISS.
>> I thought that UISS software worked with EITHER a software modem OR a
>> TNC, but reading (at least starting to read) the 75 page manual,
>> apparently it does not.
>> Since it does not, please suggest another terminal program or
>> APRS/Packet specific program.
>> My approach for the hardware is an old MFJ-1270C TNC. I'm trying to
>> learn its ins and outs from its 287 page outdated manual. GROINK
>> Additionally, I have a cable ordered with modular end for my radio
>> (IC-2730).
>> Any advise or Elmer-ing will be highly appreciated. It has been over
>> ten years since I had any experience with packet or APRS.
>> My personal email is either AB5R at AMSAT, ARRL or gp_ab5r at outlook.com
>> 73,
>> Jerry AB5R
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views
>> of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB
mailing list