[amsat-bb] TH D72

[Burns Fisher]

Zach, are you saying that you don't use the memories at all, or that the
tone and step size are not stored in the memories?  I'm pretty sure that
you can use one memory for the uplink and a different one for the downlink,
and then set the A and B side each to a different one.  I'm 99.9% sure I
did that.  And I sure thought that the tone was stored with the memory.  I
think I have an "Open SO50" and a "talk SO50" memory with different tones.
But maybe I did not check.  (Maybe that's why I have so much trouble!)

73,

Burns W2BFJ

On Wed, Jan 13, 2016 at 3:26 PM, Zach Hillerson <zach.hillerson at gmail.com>
wrote:

> Thanks for the replies.  I don't mind having to manually enter the
> appropriate frequency and have had zero issues following ao85 and so50
> through full passes.
>
> The issue that drives me crazy is having to reset the tone and step each
> time I change satellites.  If I have everything set with a 67hz tone and
> 5khz step for an ao85 pass and then enter frequencies for a so50 pass I
> have to redo the tone and steps.  It automatically defaults each time to
> 88.5 and 25khz steps.
>
> I don't know what to do to make this not have to occur.  I would prefer to
> just type in the appropriate frequencies and move on, not have to make the
> other adjustments.
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>