[amsat-bb] Satpc32 control IC910

[Jim White]

I'm trying to set up an IC910 with SatPC32 to work with a VHF up / UHF 
down satellite.

I've built a doppler.sqf entry with 435xxx as the downlink and 145xxx as 
the uplink.  The 910 will only transmit on the main band so that needs 
to be the VHF uplink. But SatPC32 puts the RX freq there, and the TX 
freq in the sub band.

Also, what should be checked in the options in the radio setup window.  
I have none checked at this time.

Is there a setting to change the main/sub tx/rx or can I just swap the 
up and down freqs in the doppler.sqf entry?

Jim