[amsat-bb] Satpc32 control IC910

[Erich Eichmann]

Check option "Satellite Mode", leave other options unchecked.

73s, Erich, DK1TB


Am 29.04.2017 um 04:25 schrieb Jim White:
> I'm trying to set up an IC910 with SatPC32 to work with a VHF up / UHF 
> down satellite.
>
> I've built a doppler.sqf entry with 435xxx as the downlink and 145xxx 
> as the uplink.  The 910 will only transmit on the main band so that 
> needs to be the VHF uplink. But SatPC32 puts the RX freq there, and 
> the TX freq in the sub band.
>
> Also, what should be checked in the options in the radio setup 
> window.  I have none checked at this time.
>
> Is there a setting to change the main/sub tx/rx or can I just swap the 
> up and down freqs in the doppler.sqf entry?
>
> Jim
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. 
> Opinions expressed
> are solely those of the author, and do not reflect the official views 
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite 
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb