[amsat-bb] analog the hard way

[Ron VE8RT]

Missed that somehow this morning.  Still must manually enter the
frequencies but the displayed Doppler corrected frequencies are big
enough.  Tried it on a pass of XW-2F, it was manageable as I could
leave the antenna alone for a while.  Could hear myself without
"hunting" for the downlink signal.

Thanks,

      Ron

On Sun, 19 Aug 2018 22:57:45 +0200
Koos van den Hout <koos at kzdoos.xs4all.nl> wrote:

> On 08/19/2018 10:42 PM, Ron VE8RT wrote:
> 
> >   First, I need to get the actual Doppler shift info up on a screen as
> > I must enter is manually.  Using the Doppler per 100MHz shown on
> > GPredict which a calculator to set the radio works but is far from
> > practical.  I'd like to bring up actual Uplink, Downlink Doppler on the
> > screen, but it hasn't been evident how to do that.
> 
> GPredict will show these values in the 'radio control' window. Even when
> there is no radio to control.
> 
> Clicking on the little triangle on the top right of the main window will
> show options like 'radio control' if you had not found that already.
> 
> Koos van den Hout PE4KH
> 
> -- 
> Koos van den Hout           PGP keyid 0x5BA9368BE6F334E4 via keyservers
> https://idefix.net/
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


-- 
Ron VE8RT <ve8rt at yknwt.ca>