[amsat-bb] analog the hard way

[Ron VE8RT]

I used Orbitron years back, I thought it was no longer supported.  It
may be an answer if it will work in "WINE"  Very nice to use, and
familiar software.

   Thanks,

           Ron

On Sun, 19 Aug 2018 17:08:17 -0400
Scott <scott23192 at gmail.com> wrote:

> If you have Windows available, Orbitron has a nice display of
> doppler-corrected frequencies.
> 
> Here is a screen shot just as an example:
> 
> http://www.qsl.net/k/k4kdr//images/orbitron-doppler.png
> 
> ... Orbitron is available from:
> 
> http://www.stoff.pl/
> 
> -Scott,  K4KDR
> 
> =================================
> 
> On Sun, Aug 19, 2018 at 4:57 PM, Koos van den Hout <koos at kzdoos.xs4all.nl>
> wrote:
> 
> > On 08/19/2018 10:42 PM, Ron VE8RT wrote:
> >
> > >   First, I need to get the actual Doppler shift info up on a screen as
> > > I must enter is manually.  Using the Doppler per 100MHz shown on
> > > GPredict which a calculator to set the radio works but is far from
> > > practical.  I'd like to bring up actual Uplink, Downlink Doppler on the
> > > screen, but it hasn't been evident how to do that.
> >
> > GPredict will show these values in the 'radio control' window. Even when
> > there is no radio to control.
> >
> > Clicking on the little triangle on the top right of the main window will
> > show options like 'radio control' if you had not found that already.
> >
> > Koos van den Hout PE4KH
> >
> > --
> > Koos van den Hout           PGP keyid 0x5BA9368BE6F334E4 via keyservers
> > https://idefix.net/
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


-- 
Ron VE8RT <ve8rt at yknwt.ca>