[amsat-bb] ao 92 fox satellite telemetry reception issue

[Dave Webb KB1PVH]

You need to grab the audio from Data2 port and run it to your computer's
line in and also long press FM button to put it in digital mode.

Dave-KB1PVH


Sent from my Galaxy S9

On Thu, Aug 23, 2018, 12:02 PM Zach Metzinger <zmetzing at pobox.com> wrote:

> On 8/23/18 10:33 AM, Jean Marc Momple wrote:
> > Shakeel,
> >
> > Most commercial radios will not pass-on the telemetry to your TNC for
> the FOX, I am not sure about the IC-9100, due to the filters in the radio
> as the TLM are below 200Hz. I had same issue with TS-2000. You should use a
> SDR instead.
>
> Jean Marc,
>
> Doesn't 9k6 need response down to DC? Why couldn't one hook up to the
> DATA2 jack on the IC-9100?
>
> Beyond that, the '9100 has a USB port which provides audio I/O to a PC,
> which is what I think Shakeel is referring to. That might have the same
> filters as the normal audio jack. A quick test using fldigi and looking
> at the waterfall will show the approximate filter shape.
>
> --- Zach
> N0ZGO
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>