[amsat-bb] BIRDS-2 Packet digipeater

[Scott]

Same here.  I've monitored numerous passes and the SNR is just too low.

Here's a tweet I just posted w/ a link to how the audio sounded at my end:

https://twitter.com/scott23192/status/1032716322679996421

... setup is a 2m X-Quad w/ AZ/EL tracking.  Both UZ7HO Soundmodem &
Direwolf (iGate) are using the audio from my TM-V71A which does very well
with PSAT, FalconSat-3, & terrestrial 1200 packet.  Of course worked great
with the ISS digipeater also.

So, they've just got too little RF power, deviation, antenna... or
something.

By the way, the 70cm CW beacons continue to operate on 437.375 & they are
pretty strong.

-Scott,  K4KDR


==============================

On Thu, Aug 23, 2018 at 3:47 PM, Frank G <wa2ndv at gmail.com> wrote:

> Hi Roy,
>
> Im using the Sound Modem by UZ7HO and UISS vers 5.4 that I used on ISS
> passes and can monitor local APRS traffic.
> Antenna is dual band Jetstream fixed at 25 deg elevation on AZ rotor.
> Setup works great on all the linear and FM sats but wanted to try something
> new.
>
> Thanks
> Frank
> WA2NDV
>
> From: Roy Dean
> Sent: Thursday, August 23, 2018 3:39 PM
> To: amsat-bb at amsat.org
> Subject: Re: [amsat-bb] BIRDS-2 Packet digipeater
>
> My D72/Elk was able to decode a few packets from each of the
> callsigns, but not display them as they appear to be non-standard APRS
> format (like the PSAT beacons).
>
>
> The ISS packets were very strong compared to these, so that could be
> one reason.   What antenna/transceiver/tnc are you using?
>
> --Roy
>
> K3RLD
>
> Wondering if its just me or does it seem like the deviation is low on these
> > sats. I can not distinguish which one I am hearing since I can not decode
> > anything yet. I used to copy the ISS packets no problem. BTW has anyone
> > heard any FM voice beacons ? Thanks
> > Frank
> > WA2NDV