[amsat-bb] Dobbler file

[James McIrvin]

OK,
Now I am at a loss here for a little bit.  Several folks have sent their
Doppler files to work with, however, the next thing is when I look at the
file at some of the sat's I see that there is 3 different sets of data for
some depending on the sat.  At this point I am not sure what to do about
this and if it is normal to see it that way depending on the install.
The next question is there a good source for finding the correct frequency
and mods list for each bird that I can edit things to where they could be
for what they are?
I would like to thank all of those that have sent information to me for
this and I will continue to look things over and see what the workarounds
might be to fix what I am seeing.

Thank you.
Jim N1IPA

On Mon, Dec 17, 2018 at 7:02 PM Ted Krempa <k7trkradio at charter.net> wrote:

> Good stuff, Joanne...thanks
>
> One thing, though, that I have never understood, however:  Does SatPC32
> properly update keps and the sqf data when the 'update' option is used in
> the program? Or do we need to keep updating manually. I can understand with
> a new sat, manually trying to find the right data, but after the sats are
> rolling along for a few weeks the normal sites that identify keps usually
> have that data current.
>
> Thanks for any input
>
> 73, Ted
> K7TRK
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of JoAnne
> Maenpaa
> Sent: Monday, December 17, 2018 5:54 AM
> To: 'Dave'
> Cc: amsat-bb at amsat.org
> Subject: Re: [amsat-bb] Dobbler file
>
> Perhaps these messages from the amsat-bb from a few weeks ago might offer
> a starting point?
>
> https://www.amsat.org/pipermail/amsat-bb/2018-October/069839.html
> https://www.amsat.org/pipermail/amsat-bb/2018-November/070451.html
>
> --
> 73 de JoAnne K9JKM
> k9jkm at amsat.org
>
>
> > -----Original Message-----
> > From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Dave
> > Sent: Monday, December 17, 2018 7:40 AM
> > To: James McIrvin
> > Cc: amsat-bb at amsat.org
> > Subject: Re: [amsat-bb] Dobbler file
> >
> > I’m not sure if you received a private response but I have a similar
> issue.
> > I tried to use SatPC32 the other day and found many of the satellite
> > frequencies were not correct. I’m going to have manually edit a bunch of
> > them unless I can find someone with a good set of files.
> >
> > Dave
> > N2OA
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>