[amsat-bb] Dobbler file

[James McIrvin]

Hey I messed up when I typed it in.  for the subject line.  So don't blame
anyone other then me.
He was just trying to make a joke out of what I did.  I did not look over
things before I hit send.

Jim

On Mon, Dec 17, 2018 at 7:14 PM James McIrvin <arsn1ipa at gmail.com> wrote:

> OK,
> Now I am at a loss here for a little bit.  Several folks have sent their
> Doppler files to work with, however, the next thing is when I look at the
> file at some of the sat's I see that there is 3 different sets of data for
> some depending on the sat.  At this point I am not sure what to do about
> this and if it is normal to see it that way depending on the install.
> The next question is there a good source for finding the correct frequency
> and mods list for each bird that I can edit things to where they could be
> for what they are?
> I would like to thank all of those that have sent information to me for
> this and I will continue to look things over and see what the workarounds
> might be to fix what I am seeing.
>
> Thank you.
> Jim N1IPA
>
> On Mon, Dec 17, 2018 at 7:02 PM Ted Krempa <k7trkradio at charter.net> wrote:
>
>> Good stuff, Joanne...thanks
>>
>> One thing, though, that I have never understood, however:  Does SatPC32
>> properly update keps and the sqf data when the 'update' option is used in
>> the program? Or do we need to keep updating manually. I can understand with
>> a new sat, manually trying to find the right data, but after the sats are
>> rolling along for a few weeks the normal sites that identify keps usually
>> have that data current.
>>
>> Thanks for any input
>>
>> 73, Ted
>> K7TRK
>>
>> -----Original Message-----
>> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of JoAnne
>> Maenpaa
>> Sent: Monday, December 17, 2018 5:54 AM
>> To: 'Dave'
>> Cc: amsat-bb at amsat.org
>> Subject: Re: [amsat-bb] Dobbler file
>>
>> Perhaps these messages from the amsat-bb from a few weeks ago might offer
>> a starting point?
>>
>> https://www.amsat.org/pipermail/amsat-bb/2018-October/069839.html
>> https://www.amsat.org/pipermail/amsat-bb/2018-November/070451.html
>>
>> --
>> 73 de JoAnne K9JKM
>> k9jkm at amsat.org
>>
>>
>> > -----Original Message-----
>> > From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Dave
>> > Sent: Monday, December 17, 2018 7:40 AM
>> > To: James McIrvin
>> > Cc: amsat-bb at amsat.org
>> > Subject: Re: [amsat-bb] Dobbler file
>> >
>> > I’m not sure if you received a private response but I have a similar
>> issue.
>> > I tried to use SatPC32 the other day and found many of the satellite
>> > frequencies were not correct. I’m going to have manually edit a bunch of
>> > them unless I can find someone with a good set of files.
>> >
>> > Dave
>> > N2OA
>>
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>