[amsat-bb] FoxTelem Set Up

[Burns Fisher]

It was actually earlier this month.  Here was the conclusion (not too
detailed, but you can ask the person who solved it):

On Fri, Oct 5, 2018 at 6:26 PM, Albert van Deursen <avdeur at home.nl> wrote:

> HI Burns,
>
> Sorry late reply but quite busy lately.. Think after just reading Hasan’s
> AMSAT Mailbox mail the solution in V3 has been found. (checked boxes
> equalizer etc)
>
> I did uncheck these boxes earlier (by coincidence I guess) and that must
> have been the reason why I started again to receive frames.
>
> Thanks yr contribution on solving this issue. 73 Albert PD0OXW
>
>
>

On Tue, Oct 30, 2018 at 11:02 PM Burns Fisher <burns at fisher.cc> wrote:

> Another person had a similar problem with SDRConsole pretty recently.
> Nearly always with troubles decoding audio there is a high pass filter
> somewhere that blocks the really low frequency audio (below 200Hz) that
> carries the data.  In the case of SDRConsole, as I recall there was a
> checkbox in some non-obvious place.  You might try looking back in the
> archived of this BB for the last couple of months.
>
> I just listened to the commissioning audio.  I can hear the telemetry but
> not very strongly.  It seems logical that since this is really meant for
> audio, not telemetry, that it was probably recorded in such a way that you
> would not get the telemetry.  (For example you are very unlikely to get
> telemetry recording off the headphone jack of your radio).
>
> Good luck and 73,
>
> Burns WB1FJ
>
> On Tue, Oct 30, 2018 at 4:31 PM sean fay <spatrickfay at gmail.com> wrote:
>
>> Hello
>>
>> I am working on getting FoxTelem working
>>
>> I am able to decode packets from recordings in the manual
>> http://amsat.us/FoxTelem/recordings/
>>
>> I am not able to decode packets from recording at
>> https://www.amsat.org/ao-92-commissioned-open-for-amateur-use/
>>
>> I am not able to decode packets from my SDRconsole V3
>>
>>
>> Any help  guidance would be appreciated
>>
>> I think my first step is, should i be able to decode packets from the
>> commissioning recording?
>>
>> Thanks in advance
>>
>> Sean Fay
>> AA0AN
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>