[amsat-bb] FoxTelem Set Up

[Burns Fisher]

Another person had a similar problem with SDRConsole pretty recently.
Nearly always with troubles decoding audio there is a high pass filter
somewhere that blocks the really low frequency audio (below 200Hz) that
carries the data.  In the case of SDRConsole, as I recall there was a
checkbox in some non-obvious place.  You might try looking back in the
archived of this BB for the last couple of months.

I just listened to the commissioning audio.  I can hear the telemetry but
not very strongly.  It seems logical that since this is really meant for
audio, not telemetry, that it was probably recorded in such a way that you
would not get the telemetry.  (For example you are very unlikely to get
telemetry recording off the headphone jack of your radio).

Good luck and 73,

Burns WB1FJ

On Tue, Oct 30, 2018 at 4:31 PM sean fay <spatrickfay at gmail.com> wrote:

> Hello
>
> I am working on getting FoxTelem working
>
> I am able to decode packets from recordings in the manual
> http://amsat.us/FoxTelem/recordings/
>
> I am not able to decode packets from recording at
> https://www.amsat.org/ao-92-commissioned-open-for-amateur-use/
>
> I am not able to decode packets from my SDRconsole V3
>
>
> Any help  guidance would be appreciated
>
> I think my first step is, should i be able to decode packets from the
> commissioning recording?
>
> Thanks in advance
>
> Sean Fay
> AA0AN
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>