[amsat-bb] FT-837 port config question

[Mark Coulthurst]

Hi
Im new to the BB list so i hope this has been done correctly....

I have a Yaesu FT847. I have satpc32 that will connect happily to the radio
and control everything as required but this only works if i set the radio
CAT menu to 9600.

Everything esle i run works at the 57600 CAT Rate and i have to change the
radio every time to 9600 CAT rate to use satpc32.

My question is this:
i presume there is a file that has the radio CAT configurations within the
sodtware. I would like to know if this is accessable and if i can overide
the 9600 current setting within satpc32 to change it to 57600?

Thanks in advance

M1AEC