[amsat-bb] FT-837 port config question

[Alan]

Mark,

Look under Radio Setup:  The top dropdown box normally says Model.  However,
you can select Baud Rate.  The FT-847 will work fine at 57600 baud with
SatPC32. 

73,

Alan
WA4SCA


<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Mark
<Coulthurst
<Sent: Monday, January 07, 2019 13:53 PM
<To: AMSAT-BB at amsat.org
<Subject: [amsat-bb] FT-837 port config question
<
<Hi
<Im new to the BB list so i hope this has been done correctly....
<
<I have a Yaesu FT847. I have satpc32 that will connect happily to the radio
<and control everything as required but this only works if i set the radio
<CAT menu to 9600.
<
<Everything esle i run works at the 57600 CAT Rate and i have to change the
<radio every time to 9600 CAT rate to use satpc32.
<
<My question is this:
<i presume there is a file that has the radio CAT configurations within the
<sodtware. I would like to know if this is accessable and if i can overide
<the 9600 current setting within satpc32 to change it to 57600?
<
<Thanks in advance
<
<M1AEC
<_______________________________________________
<Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb