[amsat-bb] Doppler adjustment proper procedure question

[Adrian Engele]

 Steve,
Take a look at this article: https://www.amsat.org/wordpress/wp-content/uploads/2015/02/FDT-WA4SCA.pdf
73, Adrian AA5UK

    On Friday, June 21, 2019, 2:13:00 PM CDT, Dave Webb KB1PVH via AMSAT-BB <amsat-bb at amsat.org> wrote:  
 
 The ARRL can't even get frequencies correct so it's no surprise they are
wrong about which frequency to adjust.

 If you aren't using computer control to be able to adjust uplink and
downlink you adjust the higher of the two frequencies.

Dave-KB1PVH


Sent from my Galaxy S9

On Fri, Jun 21, 2019, 3:05 PM AI9IN via AMSAT-BB <amsat-bb at amsat.org> wrote:

> On the official ARRL VHF/UHF info sheet
> (
> http://www.arrl.org/files/file/Field-Day/2019/2019%20Above%2030%20MHz%20-%20Rev%20A.pdf
> )
>  they suggest that for satellite QSOs operators should only adjust their
> receive frequency regardless of whether it is VHF or UHF. I thought
> standard procedure was to adjust the higher frequency whether it is
> transmit or receive.
>
> Steve AI9IN
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb