[amsat-bb] 9100 USB FoxTelemetry

[Adrian Engele]

 I saw this on an old AMSAT-BB email chain:
https://amsat.org/pipermail/amsat-bb/2015-May/053249.html
It says it has to be done through the data jack not the USB port.  

Adrian AA5UK



    On Thursday, November 21, 2019, 9:55:50 AM CST, Mark L. Hammond via AMSAT-BB <amsat-bb at amsat.org> wrote:  
 
 I have never been able to get the USB route to work in the 9100. I suspect
low frequencies are being cut off/filtered.

Mark N8MH

On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB <
amsat-bb at amsat.org> wrote:

> Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB
> port? I'm using the 9100 this way  to collect Falconsat-3 telemetry, but
> not
> able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets.
> I'm using the Data mode DFM, and 9600 baud  menu item 57 is set to ON. I've
> also tried to different sound level setting in  the win10 sound control
> panel, but no joy..
>
>
>
> 73 Jeff kb2m
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
-- 
Mark L. Hammond [N8MH]
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb