[amsat-bb] 9100 USB FoxTelemetry

[Kevin]

Hi Mark and Jeff,
     In the past I would have agreed that something was being filtered out.
Having recently taken some spectrum pics of DUV I'm not so sure,

https://www.dropbox.com/s/ghuo0jtg527b20s/duv.jpg?dl=0

The upper pic is the Data2 output the lower pic is USB to my eye they 
both look the same.

USB mode with foxtelem tries to work, you see a eye try to form, but 
even using Data2 for an input I rarely see the SNR exceed 5, of course 
the soundcard you are using can make a big difference also.

  So I dunno

73
Kevin WA7FWF



On 11/21/2019 07:53, Mark L. Hammond via AMSAT-BB wrote:
> I have never been able to get the USB route to work in the 9100. I suspect
> low frequencies are being cut off/filtered.
>
> Mark N8MH
>
> On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB <
> amsat-bb at amsat.org> wrote:
>
>> Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB
>> port? I'm using the 9100 this way  to collect Falconsat-3 telemetry, but
>> not
>> able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets.
>> I'm using the Data mode DFM, and 9600 baud  menu item 57 is set to ON. I've
>> also tried to different sound level setting in  the win10 sound control
>> panel, but no joy..
>>
>>
>>
>> 73 Jeff kb2m
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>